Seismic prediction method of multiscale fractured reservoir     

Ling-Ling Wang  Jian-Xin Wei  Ping Huang  Bang-Rang Di  Fu-Hong Zhang 《应用地球物理》2018,15(2):240-252

Common prestack fracture prediction methods cannot clearly distinguish multiplescale fractures. In this study, we propose a prediction method for macro- and mesoscale fractures based on fracture density distribution in reservoirs. First, we detect the macroscale fractures (larger than 1/4 wavelength) using the multidirectional coherence technique that is based on the curvelet transform and the mesoscale fractures (1/4–1/100 wavelength) using the seismic azimuthal anisotropy technique and prestack attenuation attributes, e.g., frequency attenuation gradient. Then, we combine the obtained fracture density distributions into a map and evaluate the variably scaled fractures. Application of the method to a seismic physical model of a fractured reservoir shows that the method overcomes the problem of discontinuous fracture density distribution generated by the prestack seismic azimuthal anisotropy method, distinguishes the fracture scales, and identifies the fractured zones accurately.  相似文献   

N油田A油组钙质隔夹层地质特征及成因分析     

廖明光  黄志强  廖纪佳  梁文锋  张航  潘柯宇 《沉积与特提斯地质》2020,40(1):26-34

在油田开发过程中,隔夹层控制油气水运动规律,对于寻找剩余油具有重要控制作用。本文以N油田TF组2段A油组为研究对象,通过薄片、岩心测试、测井、碳氧同位素等资料综合分析,研究其钙质隔夹层的分布特征、岩石学特征、物性特征、测井识别特征,并从沉积环境、物质来源、成岩作用相结合的角度分析钙质隔夹层的成因。研究表明,A油组纵向上发育的三套钙质隔夹层主要发育在前滨滩坝沉积微相,顶钙与底钙的岩性以砂质生屑质灰岩为主,中钙为钙质砂岩;三套钙质隔夹层中生物碎屑主要以腕足、腹足、有孔虫为主,含少量棘皮、瓣鳃、红藻、介形虫、苔藓虫等;成岩作用主要为胶结作用,胶结物类型包含早期方解石胶结物、中期铁方解石胶结物、晚期铁白云石胶结物;碳氧同位素分析表明,隔夹层中碳主要来自于沉积过程中的海水,同时有少量来自于大气淡水和有机酸,Ca~(2+)主要来源于生物碎屑,其次为钙长石溶解、铝硅酸盐矿物的水化作用。  相似文献   

四川盆地西北部二叠系栖霞阶层序地层特征及地质意义   总被引：2，自引：0，他引：2       下载免费PDF全文

胡笙  谭秀成  罗冰  张本健  张亚  苏成鹏  芦飞凡  李明隆 《古地理学报》2020,22(6):1109-1126

基于露头、钻井岩心和测录井资料,采用层序地层学理论与方法,将四川盆地西北部二叠系梁山组+栖霞组作为一个整体予以解剖,识别出梁山组底界面(Ⅰ型)、栖一段与栖二段界面(Ⅱ型)和栖霞组与茅口组界面(Ⅰ型)3个三级层序界面,将中二叠统栖霞阶划分为2个三级层序: 下部的SQ1层序对应梁山组+栖一段,上部的SQ2层序对应栖二段。通过栖霞阶层序地层格架分析,发现栖霞阶地层存在“底超顶削”的充填规律,统计并绘制SQ1与SQ2层序地层厚度等值线图,对研究区栖霞阶SQ1初期和SQ2期构造—古地理格局进行了恢复,在明确SQ2期为栖霞阶主要成滩期的基础上,结合岩溶发育单元及白云岩展布特征,讨论栖霞阶油气储集意义。结果表明:区内栖霞阶存在北西、北东向隆坳分异,汉南隆起、川北隆起、北缘隆起与广元—旺苍凹陷始终控制了区内沉积格局,指出广元—旺苍海槽雏形始于二叠系栖霞阶。研究区岩溶白云岩孔洞型储集层区与环广元—旺苍凹陷周缘的灰岩岩溶型储集层区为有利的勘探区。  相似文献   

塔里木盆地玉北地区奥陶系储层成因研究     

张哨楠 《沉积与特提斯地质》2020,40(3):72-86

玉北地区奥陶系碳酸盐岩经历了加里东期和海西期构造作用的改造，东部断褶带和西部斜坡区断层发育，中部平台区断层不发育，导致勘探目的层鹰山组上部与鹰山组下部和蓬莱坝组储层发育特征的不同。鹰山组上部的储层主要受控于加里东期构造活动所造成的地层抬升暴露剥蚀，形成了以大气淡水溶蚀为主的储集空间类型；而鹰山组下部和蓬莱坝组储层则主要受到埋藏白云石化作用、硅化作用以及伴随着断层的形成而发育的裂缝和热液的改造作用的控制。氧碳同位素和⁸⁷Sr/⁸⁶Sr比值的分布特征也进一步证明了两种不同储层类型的主控因素。鹰山组上部洞穴中方解石的氧碳同位素值（δ¹⁸O_VPDB：-12～-4‰VPDB，δ¹³C：-3～1‰VPDB）比海水沉淀的方解石（δ¹⁸O_VPDB：-9.5～-7.5‰VPDB，δ¹³C：-1.5～0.5‰VPDB）在数值上明显偏负，说明洞穴中充填的方解石属于淡水成因。在鹰山组下部和蓬莱坝组白云岩储层中发育的鞍形白云石具有较低的氧同位素值（δ¹⁸O_VPDB：-10.7～-5.9‰VPDB）和高于海水的⁸⁷Sr/⁸⁶Sr值（均大于0.7094），因而被解释为热液成因，进一步说明这些地层中的溶蚀孔洞可能与热液改造有关。  相似文献   

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface     

Yinpo Xu  Cheng Yin  Xuefeng Zou  Yudong Ni  Yingjie Pan  Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.  相似文献   

Terrestrial heat flow and lithospheric thermal structure in the Chagan Depression of the Yingen-Ejinaqi Basin,north central China     

Yinhui Zuo  Shu Jiang  Shihu Wu  Wei Xu  Jiong Zhang  Renpeng Feng  Meihua Yang  Yongshui Zhou  M. Santosh 《Basin Research》2020,32(6):1328-1346

The Chagan Depression in the Yingen-Ejinaqi Basin, located at the intersection of the Paleo-Asian Ocean and the Tethys Ocean domains is an important region to gain insights on terrestrial heat flow, lithospheric thermal structure and deep geodynamic processes. Here, we compute terrestrial heat flow values in the Chagan Depression using a large set of system steady-state temperature data from four representative wells and rock thermal conductivity. We also estimate the “thermal” lithospheric thickness, mantle heat flow, ratio of mantle heat flow to surface heat flow and Moho temperature to evaluate the regional tectonic framework and deep dynamics. The results show that the heat flow in the Chagan Depression ranges from 66.5 to 69.8 mW/m², with an average value of 68.3 ± 1.2 mW/m². The Chagan Depression is characterized by a thin “thermal” lithosphere, high mantle heat flow, and high Moho temperature, corresponding to the lithospheric thermal structure of “cold mantle and hot crust” type. We correlate the formation of the Yingen-Ejinaqi Basin to the Early Cretaceous and Cenozoic subduction of the western Pacific Plate and the Cenozoic multiple extrusions. Our results provide new insights into the thermal structure and dynamics of the lithospheric evolution in central China.  相似文献   

基于直觉模糊层次分析法的地震压埋率模型研究          下载免费PDF全文

肖东升  钟祖峰  罗尚  练洪  罗俊 《世界地震工程》2019,35(3):127-135

强烈地震会导致建筑物倒塌进而造成室内人员压埋，因此，把特定区域和建筑群的压埋率作为震后救援的决策指标尤为重要。但地震建筑物倒塌受多个影响因素共同作用，造成了压埋率模型的后验倒塌率评估的不确定性问题。针对这个问题采用直觉模糊层次分析法，选取了震级、震源深度、震中距、抗震设防烈度、地基和基础、建筑物结构类型和结构现状等七大影响因素进行加权分析。运用LINGO软件建模解算出了各影响因素权重，通过极大似然法估算了各影响因素对建筑物倒塌率的影响值，进而评估出了建筑物预估倒塌率，并结合先验在室率模型及其区划，建立了基于直觉模糊层次分析法的地震压埋率模型。最后以汶川灾区学校为例，进行了压埋率评估，并对其进行了误差分析。研究表明:抗震设防烈度、建筑物结构类型和结构现状是影响建筑物倒塌的主要因素；在实际评估中模型精度达到±0.15，能为震后快速应急救援提供决策辅助。  相似文献   

页岩储层叠前密度稳定反演方法          下载免费PDF全文

李金磊  尹成  刘晓晶  陈超  王明飞 《地球物理学报》2019,62(5):1861-1871

密度参数是页岩储层评价的重要敏感参数,但通常认为准确获得密度信息难度较大.本文探索提出了一种稳定的基于弹性阻抗的叠前密度反演方法,以提高优质页岩的识别精度.首先,基于不同的参数化弹性阻抗方程开展密度敏感性分析,优选了敏感性最高的Aki-Richards近似弹性阻抗方程作为反演方程.然后,在弹性阻抗方程线性化的基础上,假设反演方程系数矩阵的逆存在,将密度(取对数)表示为多个角度弹性阻抗(取对数)的加权和,通过井旁道弹性阻抗反演结果与测井数据的回归求取加权系数,避免了常规反演方法对大型系数矩阵的求逆计算,从而提高了密度反演的稳定性,同时由于利用测井资料作为匹配目标,密度反演的精度也得到了提高.模型试算和涪陵页岩气田的实际资料应用实践均表明了该方法能够有效地提高密度反演的精度与稳定性.  相似文献   

面向目标的起伏地表组合震源延时参数计算方法          下载免费PDF全文

秦龙  尹成  崔永福  刘正文  张振  方兵  陶正武 《地球物理学报》2019,62(4):1492-1501

组合震源技术通过调节延迟激发时间和震源埋藏深度能够实现地震波场的定向传播,提高地震波的照明能量和地震数据信噪比.然而,目前国内外对基于特定目标的组合震源最佳聚焦方向的选取以及起伏地表组合震源定向理论的研究相对较少.在聚焦方向选取方面,目前基本是利用多种不同延时参数的组合震源分别进行试验,从而确定较好的组合震源延时参数.本文则利用爆炸反射面原理,在目的层界面上均匀布置震源同时激发地震波,能够产生垂直于地层界面传播的平面波,当初至波传播至地表时进行地表方向统计.根据互易性原理,以初至波传播方向的反方向为聚焦方向,激发产生的地震波主波束方向将垂直入射到目的层界面上,从而精确的计算出组合震源的最佳聚焦方向.在组合震源定向方面,目前主要是利用组合震源方向因子公式进行计算,但该方法要求震源布置在同一条直线上,并不能满足起伏地表的应用要求.本文以惠更斯-菲涅尔原理为理论基础,提出通过炮点向量在聚焦方向上的投影来确定组合震源传播至虚拟波前的走时,从而确定任意起伏地表组合震源的延迟激发时间.该方法不仅能够计算出沿给定地质模型的目的层界面垂直入射的组合震源聚焦方向,也能够确定任意起伏地表情况下形成沿该聚焦方向定向传播地震波场的组合震源延迟激发时间.因此,本文提出的面向目标的起伏地表组合震源延时参数计算方法对组合震源数据采集具有理论与实践意义.  相似文献   

Numerical Simulation of the Vortex-Induced Vibration of A Curved Flexible Riser in Shear Flow     

Hong-jun Zhu  Peng-zhi Lin 《中国海洋工程》2018,32(3):301-311

A series of fully three-dimensional(3 D) numerical simulations of flow past a free-to-oscillate curved flexible riser in shear flow were conducted at Reynolds number of 185–1015. The numerical results obtained by the two-way fluid–structure interaction(FSI) simulations are in good agreement with the experimental results reported in the earlier study. It is further found that the frequency transition is out of phase not only in the inline(IL) and crossflow(CF) directions but also along the span direction. The mode competition leads to the non-zero nodes of the rootmean-square(RMS) amplitude and the relatively chaotic trajectories. The fluid–structure interaction is to some extent reflected by the transverse velocity of the ambient fluid, which reaches the maximum value when the riser reaches the equilibrium position. Moreover, the local maximum transverse velocities occur at the peak CF amplitudes, and the values are relatively large when the vibration is in the resonance regions. The 3 D vortex columns are shed nearly parallel to the axis of the curved flexible riser. As the local Reynolds number increases from 0 at the bottom of the riser to the maximum value at the top, the wake undergoes a transition from a two-dimensional structure to a 3 D one. More irregular small-scale vortices appeared at the wake region of the riser, undergoing large amplitude responses.  相似文献